-
Wheel weights
View Products
Weight Manufacturing
View Products
Workshop tools
View Products
Valves
View Products
Prodution material
View Products
-
-
-
Guide for correct appilcation of adhesive weights
Aug 24,2025
1. Clean the rims with an appropriate cleanser (e.g. 70% isopropanol) to avoid grease and silicone residues on the rim.Ensure that the temperature of weight, rim and ambient is not lower than 16℃.
2. After clean the rim, it is necessary to verify that the curvature of the rim is suitable to the weight.Place the weight (still withthe protetive film) slightly on the same rim, in order to obtain the pre-adaption of the weight.The radius of the weight body and the rim should go at least parallel to each other.
3. Remove the protetive film of the weight,and put the weight on the correct place. The weight should be applied with a pressure (at least100 kPa) pressing from the center to the two ends.
4. Press from the center towards the two ends after placing the weights. The adherence force reaches 80-90% after about 24 hours, In 72 hours, the adherence force reaches 100%.
PREVIOUS:
NEXT:
Contact Us
Phone/WhatsApp
Address
No. 88 Guozhuang Industrial Area, Xian county, Hebei province, China
WhatsApp / Wechat
Address
No. 88 Guozhuang Industrial Area, Xian county, Hebei province, China